-
AboutJulu County Binhao Transmission Equipment Co., Ltd. was founded in 2015. Binhao Transmission Co., Ltd. is located in Julu County Industrial Park, covering an area of 30 acres, with a standardized factory building of 12,000 ..
-
ProductsThe company mainly produces ML plum blossom couplings, NL gear couplings, XL star couplings, GIICL drum gear couplings, bell housings, plum blossom pads, etc. There are more than 20 series, More than 200 varieties..
-
NewsBased on the technology mastered by Binhao Transmission Technology Co., Ltd. in Julu County, ordinary steel has been turned into a mechanical accessory coupling after nearly ten processes such as blanking, finishing turning..
-
HumanFor more than ten years, the company has been paying attention to the construction of corporate culture, standardized operation and innovative development, and has made every effort to build an efficient management team...
Introduction of curved tooth coupling
Release Time:
Apr 13,2023
Curved tooth couplings are suitable for large torque changes and forward and reverse working conditions, and have a good buffering effect, but the curved tooth shape is poor in manufacturability. Since the spring leaf is in point contact with the arc surface of the tooth, the coupling can obtain great flexibility and can be installed to work normally when there are radial, angular and axial deviations at the same time. There will inevitably be problems during use, and most of the problems that occur are vibration.
Curved tooth couplings are suitable for large torque changes and forward and reverse working conditions, and have a good buffering effect, but the curved tooth shape is poor in manufacturability. Since the spring leaf is in point contact with the arc surface of the tooth, the coupling can obtain great flexibility and can be installed to work normally when there are radial, angular and axial deviations at the same time. There will inevitably be problems during use, and most of the problems that occur are vibration.
The curved tooth coupling has small radial size and large load capacity, and is often used for shaft transmission under low-speed and heavy-load conditions. The dynamically balanced tooth coupling can be used for transmission, such as the shaft transmission of gas turbines. Bearings and vibrations in all directions are dominated by power frequency, with relatively obvious double frequency components.
Couplings are suitable for the transmission connection between energy equipment and fans. They are mainly formed by unilateral half-couplings, sleeves and diaphragms between half-couplings. Double-flange couplings are suitable for two shaft ends with The long-distance and heavy-duty shaft connection can well compensate the different errors between the output shaft of the energy equipment side and the input shaft of the fan, and make the entire transmission system run stably.
The double flange coupling is one of the important transmission basic parts on the equipment. It is mainly used to connect the shafts of the two equipments to transmit torque and motion. It is mainly divided into rigid couplings and flexible couplings. We use Double flange coupling is a kind of flexible coupling. In the case of high torque and high speed, such as the energy equipment of high-speed trains, several components are output, which can withstand different types of parts.
Share To
Scan To Add Wechat
Scan To Add Wechat
Main Products
Can't find the service you're looking for? contact us!
If you need to consult our products, please leave your contact information to us, we will contact you within 24 hours.